transformer
application:

in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
characteristics:

the product is featured in the performance of high reliability, low loss, low noise, low temperature rise, low partial discharge etc.
parameter range:

ac products voltage of 1000kv and below with capacity of 1500 mva and below; dc products voltage of 1000kv and below with capacity of 1500 mva and below
standards:

technical standards of iec (international), is (indian), ieee (american), gost(russian), bs (english), as(australian), csa(canadian) etc.
main products

cabinet-type substation(american type)

cabinet-type substation(european type)

dry-type transformer in wind turbine generator room

large capacity dry type transformer(30000kva)

odfps-1000000/1000

odfps-700000/750

osfps-jt-1000000/500

photovoltaic integrated machine(american type)

photovoltaic integrated machine(european type)

prefabricated energy storage box type substation (european type)

scb type high efficiency and energy saving dry-type distribution

scbh15

sw (b) sp-f (h) -14400/69 66kv

szbh21-m · rl-200/10-nx2

traction rectifier transformer for urban rail transit

water-cooled transformer in tower for wind power

ybw20-40.5/0.69-10000

zzdfpz-405200/500-800

  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • the transformer is built into the wind generator nacelle, which can realize the local voltage boost transmission, reduce the occupation of land by the foundation, reduce the cross-section of the transmission cable, reduce the load of the tower pole, reduce the transmission cable line loss, improve the overall transmission reliability and economy, save the investment cost; it can resist the negative influence of environment, vibration, temperature, load and other aspects on transformer operation, and run safely and reliably for a long time. the product can meet the energy efficiency level of the latest eu standard in july 2021; h class insulation material, higher heat resistance temperature, product safety margin is larger; it has passed the tests of cesi in italy and lcoe in spain. the series design has been completed, covering 3.4mw, 4.5mw, 5mw, 6mw, 7mw and other mainstream wind power models, which can completely replace imports.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • odfps-1000000/1000 (1000kv 1000mva power transformer)
  • odfps-700000/750 (750kv 700mva power transformer)
  • osfps-jt-1000000/500 (500kv 1000mva field assembled transformer)
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • scbh15 type amorphous alloy dry-type transformer, zb (zgs) series (packaged substation)
  • for offshore wind power generation systems with a capacity of 66kv, it can be installed at the bottom of the wind turbine tower or at the top of the tower nacelle. and it can meet the special climate needs of the ocean, which are "anti salt spray, anti mold, and anti moisture"
  • widely used in urban power grid, rural power grid and other areas, especially in low voltage areas for a long time.
  • in power plant, power grid, large power enterprise etc. for voltage transformation and power transmission at every part of the power system.
  • product description: the transformer is built into the wind generator nacelle, which can realize the local voltage boost transmission, reduce the occupation of land by the foundation, reduce the cross-section of the transmission cable, reduce the load of the tower pole, reduce the transmission cable line loss, improve the overall transmission reliability and economy, save the investment cost; it can resist the negative influence of environment, vibration, temperature, load and other aspects on transformer operation, and run safely and reliably for a long time. the product can meet the energy efficiency level of the latest eu standard in july 2021; h class insulation material, higher heat resistance temperature, product safety margin is larger; it has passed the tests of cesi in italy and lcoe in spain. the series design has been completed, covering 3.4mw, 4.5mw, 5mw, 6mw, 7mw and other mainstream wind power models, which can completely replace imports.
  • mainly used in the field of new energy (wind power generation, photovoltaic power generation), factories, enterprises, and institutions, etc.
  • zzdfpz-405200/500-800 (±800kv 405.2mva converter transformer)
网站地图